Precautions for Cleaning Airflow Spinning Machines

The precautions for cleaning the rotor spinning machine include the following points:

1. Shutdown the machine: Before cleaning the rotor spinning machine, stop the machine first to avoid safety accidents during the cleaning process.

2. Cut off power: After shutting down the machine, cut off the power to ensure safety.

3. Wear protective gloves: When cleaning, it is necessary to wear protective gloves to avoid finger injuries.

4. Cleaning the spinning cup: Use a brush or brush to clean the spinning cup, which needs to be handled gently to prevent cotton from wrapping around the rollers and grooves. It is forbidden to loosen the anti twist disc for cleaning.

5. Cleaning the rotor: When cleaning the rotor, pay attention to cleanliness to check the sensitivity of the spinner probe, fire prevention, yarn shedding, and cleaning.

6. Check the delivery station: Check if there are any faults in the delivery station to avoid accidents when dealing with faults.

7. Ensure cleanliness and safety: After cleaning, ensure that the machine and floor are clean and tidy, and close the protective doors of the machine.

8. Cleaning the cotton sliver conveyor: When cleaning the cotton sliver conveyor, be careful to prevent damage to the comb chamber caused by feeding the cotton sliver.

9. Cleaning the combing chamber: Be particularly careful when cleaning the combing chamber to avoid jamming and damage.

10. Cleaning the yarn: When cleaning the yarn, be careful not to leave the end of the yarn too long and avoid damaging the machine.